Fenix HT32 Rechargeable Torch (USB-C)

Fenix HT32 Rechargeable Torch (USB-C). Fenix HT32 is a compact, powerful, long range torch designed primarily for outdoor sporting use. HT32 features 3 led colours with high quality beams. An intense 2500 lumen / 640m white beam, a 1400 lumen / 210m green beam and a 400 lumen / 120m red beam. Weapon mountable, HT32 is compatible with Fenix AER-05 remote switch, ALG-06 M-LOK remote switch mount, ALG-00 rail mount and ALG-16 M-LOK QR mount. 

A Fenix ARB-L21-5000U high capacity, 5000 mAh USB-C battery is included for maximum run times and rechargeable convenience. Simply remove the battery from the torch and plug the suppied USB-C cable into the battery and your mobile phone charger to top up. The battery features charging and charged status LED's under the positive terminal cap.

On/off and mode/brightness switching are controlled via an intuitive dual button tail cap interface for simple, single handed intuitive operation.

Performance

White light mode

• Low: 50 lumens (29 hrs) - 100m beam
• Med: 350 lumens (8 hrs) - 250m beam
• High: 1000 lumens (2 hrs 30 min) - 420m beam
• Turbo: 2500 lumens (1 hr 50 min) - 640m beam
• Strobe: 2500 lumens

Red light mode

• Low: 150 lumens (4 hrs 50 min) - 70m beam
• High: 400 lumens (3hrs 15 min) - 120m beam

Green light mode

• Low: 350 lumens (6 hrs) 100m beam
• High: 1400 lumens (2 hrs 30 min) 210m beam

Features

• 6500K white light colour temperature
• Momentary/constant on off tactical tail switch
• Instant strobe with light switched off
• 65C overheat protection reduces output to protect the LED
• Intelligent memory circuit - remembers your last used brightness level

Operation

On/off:
Lightly press the tactical switch to momentarily turn on the light, release and the light will go out. Fully press the tactical switch (click) to turn on the light constantly, fully press again (click) to turn off the flashlight.

Output Selection:
White Light mode: With the white light switched on, single click the functional switch to cycle through Low→Med→High→Turbo.

Red/Green light mode:
With the red/green light switched on, single click the functional switch to cycle through Low→High.

Mode switching:
With the light switched on, press and hold the functional switch to cycle through White Light mode→Red Light mode→Green Light mode.

Strobe:
With the light switched off, press the functional switch to enter Strobe, release it and the light will go out.

Intelligent Memory Circuit:
The light memorizes the last selected output, excluding strobe. When turned on again, the previously used output will be recalled.