Burris Ballistic Laserscope III 4-16x50 Rifle Scope
Related Products & Accessories
Manufacturer code: BUR-200117 | Our code: 115199
The Ballistic Laserscope 111 (called the New Eliminator III in the US) with X56 reticle technology empowers the rifleman with even more accuracy, more range, and a method of windage compensation that is now perfected AT ANY MAGNIFICATION. With the Eliminator III, you can accurately range and hit targets out to 1,200+ yards due to its enhanced ballistic programming that incorporates both the Drop Number and Ballistic Coefficient of the cartridge and load you are shooting. Combined with the new X96 reticle that offers a convenient and accurate method for determining hold-off for wind at longer ranges, the Eliminator III delivers extreme accuracy at extreme ranges.
- 1200+ Yards
- Accurate at ANY Magnification
- New Ergonomic Activation Buttons
- Enhanced Extreme Range Ballistic Programming
- Sleek, New Design
- Parallax Adjustment 50 yd. to Infinity
- Suitable for centrefire rifles only
Simple Operation & Programming
At the press of a button, you enter the Drop Number and Ballistic Coefficient appropriate for your ammunition. This data is available in the Cartridge List (1,500+ Specific Loads) provided by Burris or from just about any ballistics software program.
To range, place the cross hair on your target and press either button on the objective bell. In less than a second, the range to your target and a lighted dot will appear indicating the correct aiming point for your specific ammunition for the distance to the target.
Windage Compensation Innovation
The X56 reticle provides a convenient and accurate METHOD to more easily compensate for wind. However, complete wind compensation is NOT fully automated within the scope. It still requires some thinking on the part of the shooter. In addition to distance, the digital display will show a 10 MPH Wind Value for your specific cartridge at the indicated range to your target. This is a “Dot Value” that corresponds to the dots on each side of the reticle’s vertical post. These dots let the shooter precisely hold into the wind. The shooter still needs to estimate the cross-wind and convert the 10MPH Wind Value displayed to the appropriate value for the estimated actual MPH cross-wind value. The shooter then holds into the wind using the appropriate “Dot Value”.
Strong, Low Mounting
The unique mounting system allows the lowest possible mounting of the LaserScope to the rifle.
|Objective lens diameter||50 mm|
|No. reticles available||1|
Review by Wayne Edwards
The Burris works amazing it's the perfect tool for the job . 200 yard shot on a rabbit head shot spot on .pigeon at 175 yard head shot spot on useing a cz 452 hmr. Best scope I've ever used. Cheers Burris.
Review by P Bs
Purchased 7 months ago but not had chance to use over 300 yards. Easy to set up however tried at 1000 yards and had one dot on crosshairs with 3 more dots to bottom of lens (when looking through) it appears to shoot and hit the target at this distance is not the 1200 mentioned. Not bad upto 600 yards but not impressed over that.