Shimano Twin Power SW C 5000HG Reel
Related Products & Accessories
Product Details
Manufacturer code: TPSW5000HGC | Our code: 136217
Shimano Twin Power SW C 5000HG Reel. The new TWIN POWER SW challenges the impossible head on. It takes years of SHIMANO Big Game knowledge and experience, combines it with unrivalled engineering and delivers it in one amazing reel. Containing many of the features found on the Stella SW, considered by many to be the world's most advanced big game reel, TWIN POWER SW has the strength to cope with unrelenting battles from large offshore game fish, whilst retaining the sophistication and finesse to maximise fishing performance and enjoyment. HAGANE Body, HAGANE Gear, X-SHIP and Silent Drive refinement combine to increase winding performance and smoothness, X-Shield and X-Protect offer unsurpassed water protection and Heat Sink Drag inspires fish-playing confidence in the most extreme situations. In the world of extreme big game fishing you need a reel that will meet your expectations, in the heat of the battle. A reel which is stronger, smoother and immensely powerful. You need the new TWIN POWER SW.
Hagane Gear
The HAGANE Drive Gear is produced by Shimano’s cold forging technology, without the need for additional machining. This delivers a longlasting smoothness, strength, lightness
and power at the very heart of the reel. Traditional diecast, machined gears are less durable under heavy loads.
XShip
XShip is a combination of features that work together to create much greater efficiency. By positioning the pinion gear close to the centre line of the large diameter drive gear, more power is transferred from the handle to the rotor. The pinion gear is also supported by two Shimano ARB roller bearings. This creates more stability.
Hagane Body
The HAGANE Body is produced from high rigidity aluminium or magnesium. This creates stiffness and impact resistance, while at the same time eliminating flexing of the body. The result is a rocksolid housing and support for the moving internal gearing and greater efficiency throughout the reel.
Heatsink Drag
During drag operation accumulated heat in the drag mechanism reduces drag force and in addition the increase of spool temperature can damage PE lines. The conventional X TOUGH drag realizes an overwhelming improvement in both drag performance and durability with a revolutionary structure in which the drag mechanism part is located at the lower part of the spool. Shimano’s HEATSINK DRAG is the evolution of the conventional X TOUGH drag and manages the heat efficiently in two ways. Firstly, heat is released through a heat sink panel on the bottom of the spool resulting in 50%* more drag force retainment. Secondly, an insulation sheet in between the drag mechanism and the spool surface area results in a 30%* lower spool temperature.
Infinity Drive
INFINITY DRIVE is a new construction that eliminates sliding resistance and realizes light winding in both load and no-load conditions. INFINITY DRIVE is a non-contact construction where the inside of the pinion gear does not touch the main shaft. This reduction in sliding resistance is achieved by the application of a special low friction bushing which holds the main shaft and in addition a by the application of a special surface treatment to the main shaft itself. Handle rotation torque is reduced by approximately 30%* compared to the conventional X-SHIP construction.
Silent Drive
Removed ‘clicking’ sound and ‘handle play’ and overall improved smooth reeling.
ARC Spool
Shimano ARC Spool is a patented spool design with an angled spool lip. This design enables the line to leave the spool with less friction and in smaller coils resulting in longer more
accurate casts. ARC spools are proven to reduce backlash and wind knots when using braid.
One Piece Bail
The onepiece bail wire has no gap for line to snag on during normal operation. Made of Stainless Steel, it reduces friction and allows the line to get onto the line roller quicker.
S ARB
Shimano S ARB bearings are high corrosion resistant ARB ball bearings with an extra shield for improved protection against sand, salt or dust.
XShield
By providing dependable sealing structures and gaskets at necessary points, including the reel body and lid joint and the contact point of the spool and drag knob, possible water ingress is blocked. This double protection provides high reliability and durability to the STELLA SW when used in extreme saltwater conditions.
Product Specification
| Line Capacity | 200/0.33 - 150/0.37 - 130/0.405 m/mm |
|---|---|
| Gear Ratio | 5.7:1 |
| Ball Bearings | 10+1 |
| Max Drag | 29 lbs |
Product Reviews
Review by Peter
Excellent reel not far from Stella very good quality much more better quality than Saragosa lighter better for all day vertical fishing size 5000 good not much bigger than c5000 normal bodies worth to have
Add product reviews is disabled. To enable reviews, please allow functional cookies.
