Pulsar Nightvision
Pulsar Merger DUO NXP50 Multispectral Thermal/Digital Binoculars
Free Bushnell Trail Camera (RRP £199.99)
Pulsar Merger DUO NXP50 Multispectral Thermal/Digital Binoculars. The Merger Duo NXP50 provides users with the detection capabilities of a powerful thermal imaging device and the identification capabilities of a fully-fledged digital night vision device. Plus, with combined viewing mode and Picture-in-Picture, users can even evaluate the terrain around them via the digital night vision channel whilst identifying an observed animal’s anatomical features through the thermal channel.
Pulsar Digex C50 Digital Colour Night Vision Scope
Colour the Darkness!
Pulsar Digex C50 Digital Colour Night Vision Scope. The Digex C50 is Pulsars next step for the Digex Series, incorporating a more powerful 1928x1088 FHD CMOS sensor which alongside SumLight functionality increases the units ability to observe high amounts of detail day or night. This new sensor and the updated design allow users to shoot in either black & white or full-colour vision, with a highly intuitive control dial (Aperture Adjustment Ring) located just in front of the Digexs objective len
Pulsar Digex C50 Digital Colour Night Vision Scope with Digex X-850s Illuminator
Colour the Darkness!
Pulsar Digex C50 Digital Colour Night Vision Scope with Digex X-850s Illuminator. The Digex C50 is Pulsars next step for the Digex Series, incorporating a more powerful 1928x1088 FHD CMOS sensor which alongside SumLight functionality increases the units ability to observe high amounts of detail day or night. This new sensor and the updated design allow users to shoot in either black & white or full-colour vision, with a highly intuitive control dial (Aperture Adjustment Ring) located just in fro
Pulsar Forward F455S Digital Front Attachment
Easy transformation of an optic sight into a night vision device!
Pulsar Forward F455S Digital Front Attachment. The Forward F455S is fitted with a 1280x720 HD CMOS Sensor, which alongside the frost-resistant 1746x1000 HD Display, 50Hz frame rate, fast 50mm objective lens (f/1.0) and sensitivity enhancing SumLight™ firmware results in a night vision optic that produces smooth and highly detailed results even whilst tracking fast moving objects, even up to the units 500m detection range.
Day Scope Adaptor to fit a Challenger GS 1x20 or a Challenger GS 1x20 NVG to the back of a day scope.
Pulsar Ultra AL-915 IR Laser Illuminator. Enables you to increase detection range; identify objects in greater detail; increase the observation range; adjust the size of the IR light beam from spot to flood depending on distance; adjust the position of IR spot in the field of view abd smoothly adjust the strength of the IR illuminator according to the viewing conditions. Compatible with Pulsar N355 and F155 models.
Pulsar Ultra 940 IR Illuminator. Enables you to increase detection range; identify objects in greater detail; increase the observation range; adjust the size of the IR light beam from spot to flood depending on distance; adjust the position of IR spot in the field of view abd smoothly adjust the strength of the IR illuminator according to the viewing conditions.
Pulsar Ultra-X850 IR Illuminator. Interchangeable infrared illuminator for Digisight Ultra N400th riflescopes and Forward F400th digital night vision front attachments. 3-Step power adjustment. Powered by the NV riflescope.
Pulsar Ultra-X940 IR Illuminator. Interchangeable infrared illuminator for Digisight Ultra N400th riflescopes and Forward F400th digital night vision front attachments. 3-Step power adjustment. Powered by the NV riflescope.
Pulsar IR Illuminator (Digex X940). Interchangeable IR illuminators for Digex digital night vision riflescopes with a smooth power adjustment, adjustable IR spot position and a Mounting diameter 30mm.
Pulsar APS3 Battery Pack. Miniature power elements used in Axion, Thermion, and Digex series of thermal imaging and digital night vision devices provide sufficient operation time and can be quickly replaced. Pulsar’s APS3 Battery Pack has a 3.2Ah capacity and can be quickly charged either with the APS Battery Charger Station (sold separately) or through its intended unit via MicroUSB.
Pulsar APS Battery Charger. Intended for charging the APS2 / APS3 battery packs, up to two at a time.
Pulsar IPS7 Battery Pack. An interchangeable standard power supply for Trail, Helion, Digisight Ultra, Accolade and Forward units. Grants 10-13 hours operating time and has smart charging.
Pulsar IPS14 Battery Pack. An interchangeable standard power supply for Trail, Helion, Digisight Ultra, Accolade and Forward units. Grants 16-20 hours operating time and has smart charging.
Pulsar IPS Battery Charger. The IPS Battery Charger is intended for the recharging of IPS5, IPS7, IPS10 & IPS14 Battery Packs. Designed with an indicator light, allowing users to see the progress of the batteries charge levels.
Pulsar APS-V 2 Slot Battery Charger (APS2/APS3/APS5). Intended for charging all APS battery packs. Charges two batteries simultaneously, APS2 & APS3 batteries in one slot, and APS5 batteries in the other.
Pulsar PB8I Power Bank (fits any Micro USB port/attaches to Weaver Rails). With an 8Ah capacity this external power supply can provide power to any unit with a MicroUSB port. It will also attach to Weaver Rails.
Pulsar Digisight Mount - Dovetail. Includes Dovetail rifle mount, fixing screws and user manual.
Pulsar Weaver Mount (Digisight). Digisight Weaver rifle mount for Digisight scopes. Includes fixing screws and user manual.
Pulsar Digisight/Apex Weaver Mount. A mount for fixing Pulsar Digisights and Apexs to a rifle with a Weaver rail. Equiped with fasteners to suit weaver & Picatinny 21mm rails. Made from an aluminium alloy.
Pulsar Neck Strap. The Pulsar neck strap is designed to be fixed to the devices which are equipped with ¼ inch tripod socket. It can be used with thermal imagers Quantum/ Quantum S and night vision devices Challenger and others.
The Pulsar Day Scope Adaptors (DSA) is designed to allow the attachment of a Challenger Night vision monocular to a weapon scope.
Pulsar Cover Ring Adaptor - For DFA75/DN55/Core FXQ. Cover Ring Adaptors attach the Forward DFA75/DN55/Core FXQ to the front of a day weapon scope. Manufactured in Aluminium Alloy, each adaptor comes with inserts to suit different size objective lens housings.
Pulsar FN Cover Ring Adaptor (for Forward Series). New four-point day scope attachment. With inserts to suit different housings. Three sizes: 42, 50 & 56mm (Forward Series).
Pulsar TSD1 Torque Screwdriver. The TSD1 Torque Screwdriver is designed to screw threaded parts with certain force. The Torque Screwdriver is used to tighten the screw of the adapter that attaches an optical device on front attachment.
Pulsar Window Frame Mount. The Pulsar Window Frame Mount is a Tripod used for mounting optical devices on to the outside elements of a standard PVC window or other suitable window. The Tripod features a swivel head with 1/4 inch screw that has a quick release plate.
Pulsar Tree Mount. The Pulsar Tree Mount is intended for the fixing of Pulsar devices equipped with a 1/4" tripod mount on such vertical elements as a tree trunk or branch, pillar, column etc. Mounting is effected with the aid of adjustable straps or with screws that are screwed into wooden parts of a structure through the holes in plastic parts of the Tree Mount. The Weaver rail allows additional equipment, such as Pulsar PB8I Power Bank, to be mounted.
Pulsar BT Wireless Remote Control. An innovative ergonomic remote control to operate Krypton XG50/FXG50 & Forward F455S/FN455S units from a distance.
Pulsar Eyecup for Thermion/Digex.
Pulsar VMQ70 19x1.5 O-Ring for APS Series.
Pulsar A1000-CP-T0017 Cable for Quantum/Digex.
Pulsar USB Cap for Thermion/Digex.
Pulsar Eyecup for Digisight/Photon/Apex/Trail.
Pulsar APS5 Battery Lock. A locking cap for Pulsar APS5 Battery Packs.