Shimano Stella SW-D 10000 HGD Reel

The Stella SW is a serious investment, but for those whose passion for fishing matches the reel’s uncompromising design, it’s a perfect match. With the Stella SW, you’ll never feel underpowered. Experience the ultimate in saltwater fishing with a reel that’s truly exceptional.

HAGANE
HAGANE is a Shimano reel design concept created to withstand continual use and extreme abuse. HAGANE is an innovation with built-in toughness and durability that works alongside Shimano's precision engineering. HAGANE is for all anglers.

HAGANE GEAR
The HAGANE Drive Gear is produced by Shimano’s coldforging technology, without the need for additional machining. This delivers a longlasting smoothness, strength, lightness
and power at the very heart of the reel. Traditional diecast, machined gears are less durable under heavy loads.

X SHIP
X SHIP provides improved gear durability. By supporting the pinion gear on both ends with bearings, the pinion gear maintains precise alignment with the drive gear. This increased support allows the gears to stay in the same position under the heaviest loads. X-Ship technology also eliminates the friction between the spool shaft and gear to further benefit anglers with enhanced casting performance and casting distance of lighter lures.

HAGANE BODY
The HAGANE Body is a metal reel body with high rigidity. The body rigidity and impact resistance virtually eliminate body flexing on the reel while fighting a fish. The result transforms the angler's actions directly into cranking power.

INFINITYLOOP
Super slow oscillating that goes beyond slow oscillating. The speed at which the spool moves up and down has been made overwhelmingly slow through the evolution of the internal structure. The line is wound around the spool one by one in an orderly and precise manner, and the line release resistance has been successfully reduced significantly. This has realized an exhilarating casting feel and smooth line feed.

INFINITYXROSS
INFINITYXROSS provides superior gear durability through industry-leading design and cutting-edge manufacturing technology. Advancements in the gear tooth design improve the surface contact and meshing between the drive gear and pinion gear. This revolutionary design efficiently distributes the load placed on the gear tooth surface across a wider area to prevent damage from stress points while significantly improving overall gear durability.

INFINITYDRIVE
INFINITYDRIVE technology is an advanced structure that produces lower friction and lighter winding. Pinion gear is supported by the spool shaft instead of the pinion gear bearing on the spool side. Rotational resistance of the gear section has been reduced without compromising gear strength.

HEATSINK DRAG
HEATSINKDRAG is a revolutionary structure to prevent the drag force reduction by drag heat. The ''HEATSINK panel'' located at the bottom of the spool dissipate heat generated by drag. In addition, the "heat-insulating sheet" has succeeded in reducing the temperature rise in the winding area.

SILENTDRIVE
The basic design of the entire body and drive-related parts were reviewed one by one to reduce minute rattles, gaps, and shaking between parts down to the smallest detail. It provides smooth and quiet reel rotation.

ANTI-TWIST FIN
Elastic fins are installed in close proximity to the line roller section. By suppressing line slack, the fins reduce the phenomenon of line dropping out of the lower part of the spool and line wrapping around the spool while the line is still twisted.

X SHIELD
The body is water-resistant equivalent to IPX8 by water-resistant seals on the body, side covers, and other parts of the body.

X PROTECT
Large reels for saltwater, a contact-type water-resistant structure is used for large spinning reels that require higher water-resistant performance. By physically cutting off the entry path of seawater with a low-sliding seal member, high water-resistant performance is achieved while suppressing rotational resistance. The stopper bearing and line roller parts are adopted, and the stopper bearing part in particular achieves a water-resistant rating equivalent to IPX8.

XX TOUGH DRAG
Each washer is made of metal and carbon. Larger diameter drag washers have been installed on both the top and bottom sides of the spool. As a result, smooth and stable drag performance has been enhanced by improving heat resistance and durability.

AR-C SPOOL
The spool has a special spool ring shape. This creates a rectifying effect on the line and realizes both suppression of line trouble and long casting performance.

RIGID SUPPORT DRAG
By strengthening the spool support of the main shaft, the play and fluctuation of the spool during drag operation are reduced. The RIGID SUPPORT DRAG allows smooth and consistent drag delivery.

CROSS CARBON DRAG
The CROSS CARBON DRAG provides the smooth drag release and the  durability.

SA-RB
S A-RB bearings are put through the same process as Shimano’s A-RB bearings but feature shields on both sides of the bearings. These shields reduce the possibility of salt or sand inhibiting the rotation of the bearing.

ONE-PIECE BAIL
ONE-PIECE BAIL allows the line to travel unimpeded to the line roller. The seamless design reduces friction and decreases the chance of tangles or the line catching on the bail arm.