Shooting Accessories
Uttings has a huge range of shooting and hunting accessories, with well over 2000 shooting products available. We stock everything the UK shooter needs, including shooting accessories from top shooting brands including Beretta, Browning, Deben, Winchester, Bisley and Harris Bipods. Some of our most popular categories include gun cleaning and care, rifle scopes, bipods and supports, gun lights and gun slips and hard cases. For everything you need in gun security, see our gun safes and cabinets category. Rifle scopes are available from the world's top optics brands including Zeiss, Swarovski, Leupold and Schmidt and Bender.
Harris 25CP Picatinny Rail Swivel Bipod - 13.5-27 Inches. This new bipod will attach effortlessly to any standard specification picatinny/weaver rail, making it a great choice for many of todays leading firearms.
Harris Bipod - 1A2-25C - Solid Base - 13.5-27in. Harris Bipod The Harris bipods are quick detachable and clamp to the Q. D. stud of any rifle, we offer adapters for those rifles that do not have a factory installed Q. D. studs. Carrying with a sling or shooting off - hand is not impeded by the Bipod.
Harris Bipod - S-25C - Swivel Base - 13.5-27in. Rotates to either side for instant levelling on uneven ground. Hinged base has tension adjustment and buffer springs to eliminate tremor or looseness. They are otherwise similar to non - rotating Series. Available for ALL models except the H model.
Harris BRMP - Picatinny Rail Swivel Bipod - 6-9in - Notched Leg. This new bipod will attach effortlessly to any standard specification picatinny/weaver rail, making it a great choice for many of todays leading firearms.
Harris S-BRP - Picatinny Rail Swivel Bipod - 6-9in.
Harris S-LP - Picatinny Rail Swivel Bipod - 9-13in.
Harris S-L2 - Picatinny Rail Rotate Self Levelling Bipod - 9-13in.
Harris 1A2-L2 Picatinny Rail Rotate Self Levelling Bipod - 9-13in.
Harris Bipod - S-BR2 - Swivel Base - 6 Inch-9 Inch.
Harris Bipod - 1A2-BR2 - Solid Base - 6 Inch-9 Inch.
Harris Bipod Spacer 7a. Rubber spacer may allow mounting of Bipods on thin fore-ends, reversible to change angle of Bipod.
Harris Bipod Number 5 Stud. Fits AR-15 A2 handguards, sling swivel included.
Harris No.2R Flange Nut Wood Forend Adaptor. Has radiused flange for mounting to wood fore-ends under magazines or gas tubes.
Hawke Fixed Bipod - 6-9 Inch/15-23cm.
Hawke Fixed Bipod - 9-13 Inch/23-33cm.
Hawke Tilt Bipod w/Lever - 6-9 Inch/15-23cm.
Hawke Tilt Bipod w/Lever - 9-13 Inch/23-33cm.
Hawke Swivel & Tilt Bipod w/Lever - 6-9 Inch/15-23cm.
Hawke Swivel & Tilt Bipod w/Lever - 9-13 Inch/23-33cm.
Hawke Barrel Mounted Bipod - 0.47-0.7 Inch/12-18mm.
Hawke PCP Bottle Clamp Ring Bipod Adaptor - 1.9-2.1 Inch/48-53mm.
Hawke PCP Bottle Clamp Ring Bipod Adaptor - 2.4-2.5 Inch/60-63mm.
Hawke Weaver/Picatinny Clamp to Swivel Stud Bipod Adaptor.
Hawke Carbon Fibre Pro Bipod - Notched Leg (8-12 Inches/20-28cm).
Hawke Carbon Fibre Pro Bipod - Smooth Leg (8-12 Inches/20-28cm).
Hills EVO-310 Compressor & Dry Pac Pro Bundle
Made in Sheffield, Great Britain!
Hills EVO-310 Compressor & Dry Pac Pro Bundle. The EVO has a number of changes and improvements in how the compressor works, including some great new features, making the Hill Compressor even more reliable, durable and with a better user experience.
Hills EC3000-001 EVO 310 Electronic Air Compressor
Made in Sheffield, Great Britain!
Hills EC3000-001 EVO 310 Electronic Air Compressor. The EVO has a number of changes and improvements in how the compressor works, including some great new features, making the Hill Compressor even more reliable, durable and with a better user experience.
Hills Compressor Dry-Pac Pro - Air Dryer Filter
For EC3000 Compressor
Hills Inline Filter Kit. For use with the EC3000 Compressor
Hills EC-3000 Oil Kit. Oil Kit for the Hill EC-3000 Electric Compressor. Includes 1 x Silicone Oil Bottle (100ml) & 1 x Crank Oil Bottle (50ml). Both of these oils have been specifically manufactured and designed for use with the EC-3000 Electric Compressor. No other oils should be used with the EC-3000.
Hills Silicone Oil - 100ml. Maintenance oil for the Hills EC3000 Air Compressor. Goes into chamber on compressor with blue screw lid. Fill to blue fill line.
Hills Crank Oil - 50ml. Maintenance oil for the Hills EC3000 Air Compressor. Goes into small chamber with red screw lid with filter on top. Fill to red marker line. Leave to sit for 5 minutes and top-up as level falls when the oil is poured into the system.
Hills EC-3000/EC-3000 EVO - 50hr Service Kit. This service kit is designed to be used after your EC-3000 / Evo Compressor reaches 50 hours of run time. Kit updated February 2025 to now include 1 x Stage 3 Face Seal. The kit has everything you need to service your compressor after 50 hours of run time use.
Hills EC-3000/EC-3000 EVO - 100hr Service Kit. This service kit is designed to be used after your EC-3000 / Evo Compressor reaches 100 hours of run time. Kit updated February 2025 to now include 1 x Stage 3 Piston Backup Ring and 2 x Stage 3 Stainless Mesh Filter. The kit has everything you need to service your compressor after 100 hours of run time use.
Hills EC-3000/EC-3000 EVO - Extended Service Kit. This service kit is designed to cover everything you should need to perform the first 2 services on your EC-3000 / Evo compressor, these should be at 50 and 100 hours run time respectively. Kit updated February 2025 to now include 2x Stage 3 Face Seal and 2 x Stage 3 Stainless Mesh Filter.
Hills Stirrup Pump - MK5
Made in Sheffield, Great Britain!
Hills Stirrup Pump - MK5. The 5th Generation Hill PCP Pump. The trusted style and familiarity of Hill pumps on the outside but all new on the inside.
Hills Pump MK4/MK5 Dry Pac Filter. This kit is for the MK4 and new MK5 pump only and comes with everything you need including 1 sachet of DryPac Refill. Not for use with the MK2 or MK3 pump.
Replacement Granules for Hills Stirrup Pump
This adapter will fit into a 1/8 bsp stirrup pump/bottle hose and allow you to fill a 1/4 bsp buddy bottle.
Converts the 1/8 BSP standard pump outlet for rapid hose connection.
Hills Pump Micron Filter/Seal Kit For Mk4. Replacement micron filter kit for MK4 Hill Pump only. This part is included with all full service kits.
Hills Pump Piston Seal Kit For Mk4. Set of 3x Piston Seals for MK4 Hill Pump. The classic symptom of a problem with this seal is resistance on the upstroke and tendency to recoil back downwards. The piston seal is the workhorse of the pump and it's life can be dramatically shortened by overheating and a lack of lubrication. To maximise the life of this seal please follow the advice on pumping and lubrication in our instructions.
Hills Pump Filter/Full Internal Seal Kit For Mk4. Full Service seal kit for the MK4 Hill Pump. Includes micron filter, piston seal and all other seals. MK4 pumps can be identified by the composite footplate.
Hills Female QR Coupling - 1/8 BSP. 1/8" BSP Female Quick Release Coupling.
Hills Male QR Coupling to 1/8 BSP Female.