Vanguard Veo PA-62 Universal Digiscoping Adaptor For Smartphones

Vanguard Veo PA-65 Universal Digiscoping Adaptor For Smartphones. The VEO PA-65 is a digiscoping kit that will fit any smartphone up to 90mm wide, and can be used with almost any spotting scope from any brand to enable you to take captivating closeup shots and share them straight to social media.

With the VEO PA-62 you can find your subject through your optics, focus, shoot and share to social media in seconds. It's the perfect accessory for nature lovers, birders, sports lovers, scouts, and urban explorers.

Designed to fit any smartphone between 59 to 90mm wide, simply put your smartphone into the clamp and adjust the aperture to the lens of your choice. 

It's also designed to fit any eyepiece between 41.5 and 45mm in diameter, making it ideally to fit to a wide range of binoculars and monoculars from all leading brands.

The VEO PA-62 comes with two silicone rubber rings.  The thicker ring allows you to use the adaptor with smaller eyepieces (41.5-43mm diameter) and the slimmer ring allows you to use the adaptor with larger eyepieces (43-45mm diameter). It comes fitted as standard with the thicker rubber ring.

Once the correct rubber ring is in place, it takes seconds to attach or remove your VEO PA-62 from your optics using the locking dial.

The VEO PA-62 also includes a Bluetooth remote control that can be used with IOS or Android smartphones.  This lets you take your shots or start recording hands-free, thus avoiding camera shake and blurring.

Please note, this digiscoping kit is not compatible with spotting scopes which tend to have larger eye-pieces.  If this is of interest, then the VEO PA-65 is a disgiscope adaptor designed for larger eyepieces.

Features

• Fits any smartphone between 59mm and 90mm wide
• The eyepiece can be adjusted to align to any lens
• Fits any binocular eyepiece between 41.5mm and 45mm wide
• Includes a Bluetooth remote control to offer more shot-capturing stability
• Mount directly onto a tripod or monopod using the 1/4"thread in the base